N-Tron 702M12-W Manual do Utilizador descarregar pdf (Página 14)

Revision 04062009 Page 14 of 52

Connecting the Unit

For the 10/100 Base-TX port, plug a Category 5E twisted pair cable into the RJ45 connector. Connect the

other end to the far end station. Verify that the LNK/ACT LED is ON once the connection has been

completed. Use a standard Category 5E straight through or crossover cable with a minimum length of one

meter and a maximum length of 100

meters.

N-Tron recommends the use of pre-

manufactured Cat5E cables to ensure the

best performance. If this is not an option

and users must terminate their own ends

on the Cat5E cables; one of the two color

coded standards shown to the right should

be utilized. If a user does not follow one

of these two color code standards then the

performance and maximum cable distance

will be reduced significantly, and may

prevent the unit from establishing a link.

RJ45 CONNECTOR CRIMP SPECIFICATIONS

Please reference the illustration below for your Cat5 cable specifications:

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 51 52

Sem comentários

N-Tron 702M12-W Manual do Utilizador Página 14